Grundfos dosing pumps
Official Grundfos distributor, SINES Export supplies the entire Grundfos dosing catalogue: SMART Digital DDE, DDC and DDA digital dosing pumps from 6 to 30 l/h, SMART Digital XL from 60 to 200 l/h, DMX mechanical pumps up to 765 l/h, and all the accessories (installation kits, injection valves and suction lances, tanks, pulse water meters).
A dosing pump injects a liquid chemical into a water pipe in a precise quantity: sodium hypochlorite to disinfect water from a borehole or a network, acid or caustic soda to correct the pH, coagulant and flocculant in treatment plants, liquid fertiliser on a drip irrigation network, treatment chemical in a cooling tower or a public swimming pool.
Grundfos Digital Dosing technology replaces the stroke adjustment of conventional pumps with a variable-speed stepper motor: the diaphragm always works over its full stroke, dosing remains even and accurate from 0.1 to 100 % of the flow rate, and the setting is made directly in l/h on the pump.
6 l/h, 10 bar. Manual control (B), pulse (P) or pulse and relays (PR). The best-selling dosing pump for chlorination and pH correction.
15 l/h, 4 bar. Same B, P and PR variants, for higher chemical flow rates at low pressure.
6 l/h at 10 bar or 9 l/h at 7 bar. Graphic display, SlowMode, 4-20 mA analogue input on the AR variant.
15 l/h, 4 bar. A and AR variants, for treatment plants and chlorine or pH controllers.
7.5 l/h, 16 bar, turndown ratio 1:3000. Built-in Bluetooth and Modbus, FlowControl flow measurement on the FCM variant.
12 l/h at 10 bar or 17 l/h at 7 bar. New-generation DDA, automatic deaeration, AutoFlowAdapt.
30 l/h, 4 bar. The largest SMART Digital S, AR and FCM variants.
DDA and DDE XL 60-10, 120-7 and 200-4: Digital Dosing technology for medium flow rates.
22 sizes from 7.2 to 765 l/h, up to 16 bar, three-phase or single-phase motor. Select range stocked by Grundfos.
Which Grundfos dosing pump should you choose?
| Range | Flow rate | Max. pressure | Control | Key features | Intended for |
|---|---|---|---|---|---|
| DDE | 6 and 15 l/h | 10 bar | B, P, PR | Entry-level price, stepper motor, 1:1000, 19 W | Simple chlorination and pH correction, fertigation, swimming pools |
| DDC | 6, 9 and 15 l/h | 10 bar | A, AR | Graphic display, SlowMode, 4-20 mA, 2 relays | Treatment plants, chlorine/pH controllers |
| DDA-C | 7.5 to 30 l/h | 16 bar | AR, FCM | Bluetooth, Modbus, 1:3000, FlowControl, AutoFlowAdapt | Supervised processes, remote monitoring, high pressure |
| SMART Digital XL | 60 to 200 l/h | 10 bar | B, AR, FCM | Digital Dosing for medium flow rates, 1:800 | Medium-sized plants, industry |
| DMX Select | 7.2 to 765 l/h | 16 bar | Manual, AR optional | Robust mechanics, three-phase or single-phase motor, stocked by Grundfos | Municipal, industry, high flow rates |
Three questions are enough to size a dosing pump: the chemical flow rate to be injected in l/h (treated water flow rate × required dose ÷ product concentration), the back pressure at the injection point in bar, and the nature of the chemical, which determines the dosing head materials (PVC and FKM for hypochlorite, PP or PVDF for acids, PVDF and PTFE for concentrated oxidants). The control mode then follows from the installation: manual for constant dosing, pulse to follow a water meter, analogue 4-20 mA to follow a controller, Modbus for supervision.
Our engineering team helps you choose the size, the variant and the accessories, and prepares complete sets for export: pump, installation kit, injection valve, tank with suction lance, water meter, spare parts.
Chlorinating a solar borehole
On an SQFlex or SP + RSI station, the dosing pump is installed on the discharge pipe upstream of the tank. A DDE 6-10 P or a DDC 6-10 receives the pulses from a water meter and injects hypochlorite in proportion to the volume pumped; it is powered by the station's mains supply or by a small inverter.
Disinfection and measurement
Beyond dosing pumps, the Grundfos catalogue includes Selcoperm electrolysers (hypochlorite production from salt), Oxiperm Pro chlorine dioxide generators, DID measuring systems with chlorine, pH and redox sensors, and complete tank-mounted dosing stations. Available on request.
Choosing the right Grundfos dosing pump
Maximum flow rate in l/h, discharge pressure in bar, then control variant (manual, pulse, analogue) and dosing head materials according to the chemical.
DDE, DDC or DDA
DDE for constant dosing set by hand, DDC for dosing proportional to a water meter, DDA for advanced functions (integrated flow meter, bus communication, automatic deaeration); see the DDE 6-10, DDC 6-10 and DDA 7.5-16 product pages.
XL and DMX
SMART Digital XL from 60 to 200 l/h in digital technology, motor-driven DMX up to 765 l/h for treatment plants and industry.
Materials and accessories
PP, PVC, PVDF or stainless-steel head, EPDM or FKM gaskets, ceramic balls depending on the chemical; installation kit, injection valve, suction lance with level control, storage tank and pulse water meter.
Frequently asked questions
Which pump for chlorinating a 10 m³/h borehole?
A DDC 6-10 or DDA 7.5-16 controlled by a pulse water meter, with a PVC or PVDF head for hypochlorite; we calculate the dosing flow rate from the target concentration.