Solar · Storage · Off-grid B2B worldwide export wholesaler

Professional equipment supply for installers, EPC contractors and distributors.


Grundfos pressure boosting for water supply

SINES - Grundfos - Hydro MPC-E booster set, 3 CRE pumps

Official Grundfos distributor, SINES Export supplies the Hydro Multi-E and Hydro MPC variable-speed booster sets: two to six CR, CRE or CME multistage pumps on a stainless-steel base frame, constant-pressure control, automatic cascade control and remote monitoring, delivered assembled and tested. It is the logical continuation of the SP solar borehole and the RSI inverter: the borehole fills the tank or the water tower, and the booster set distributes the water under pressure to the village, the hotel or the hospital.

A booster set maintains a constant pressure on the network whatever the number of taps open: the pumps with frequency converter speed up or slow down, cut in in cascade at peak hours and stop at night on the diaphragm tank. The result: no water hammer, lower electricity consumption at partial flow and supply maintained if a pump fails, thanks to redundancy.

Hydro Multi-E for village water supply schemes, residential buildings, hotels, schools and medium-sized hospitals (up to 11 kW per pump); Hydro MPC with CU 352 control cabinet for towns, districts, large institutions and industrial sites (up to 725 m³/h). The Hydro Multi-B and Multi-S fixed-speed booster sets and the Hydro Solo-E single-pump booster set are available on request. Local-authority and NGO projects worldwide: we prepare the selection, the data sheets and the export logistics.


GRUNDFOS HYDRO MULTI-E CRE
Booster set, 2 to 4 CRE pumps with frequency converter

CRE 1 to 20, 0.37 to 11 kW per pump, constant pressure, automatic cascade control, stainless-steel manifolds, ready to connect. The booster set for villages, hotels and hospitals.


On request
GRUNDFOS HYDRO MULTI-E CME
Compact booster set, 2 or 3 CME pumps

CME 3 to 25 horizontal pumps, low base frame for low-ceiling rooms and skids, same control functions as the CRE version.


On request
GRUNDFOS HYDRO MPC
Water supply booster set, 2 to 6 CR pumps, CU 352 cabinet

MPC-E and MPC-F, CR / CRE 10 to 64, up to 725 m³/h and 145 m, touch screen, standby pumps, remote monitoring. For the networks of towns, districts and large institutions.


On request

Which Grundfos booster set should you choose?


Range Pumps Power per pump Rated flow rate Max. head Control Intended for
Hydro Multi-E CRE2 to 4 CRE 1 to 200.37 to 11 kW4 to 76 m³/h133 mMGE electronics, GO Remote, CIMvillages, hotels, schools, medium-sized hospitals
Hydro Multi-E CME2 or 3 CME 3 to 251.1 to 7.5 kW6 to 66 m³/h83 mMGE electronics, GO Remote, CIMlow rooms, skids, residential buildings
Hydro MPC-E / MPC-F2 to 6 CR / CRE 10 to 900.37 to 30 kW22 to 725 m³/h145 mCU 352 cabinet, IO 351, remote monitoringtowns, districts, hospitals, industry
Hydro Multi-B / Multi-S2 to 4 CM / CR0.37 to 30 kWon requeston requestpressure switches, fixed speedsmall budgets, steady consumption
Hydro Solo-E1 CRE0.37 to 11 kWon requeston requestMGE electronicssingle-pump pressure boosting

Rated flow rates from the Grundfos catalogue; the full range goes further on request. For a water supply network, take the peak hourly flow rate and allow for a standby pump: a three-pump Hydro Multi-E covers the peak with two pumps and keeps the third on standby.

Choosing the right booster set


From the borehole to the network
In a village water supply scheme or on an off-grid site, the borehole equipped with an SP pump and an RSI solar inverter fills a ground-level tank or a water tower during the hours of sunshine. The booster set, installed below the tank, then keeps the network at constant pressure: it replaces the water tower where the topography does not allow one to be built high enough, or complements it to supply an elevated district, a hospital or a hotel that requires 3 bar on the upper floors. SMART Digital dosing pumps chlorinate the distributed water.

Flow rate, pressure, redundancy
The peak flow rate is calculated from the population served or the number of rooms and draw-off points; the setpoint pressure is the sum of the static head, the friction losses and the required residual pressure. The number of pumps follows from the continuity requirement: two pumps for normal service, three or more with a standby pump where the water must never run out. Variable-speed booster sets limit the power demand and water hammer, which matters on an old network or one supplied by a generator.

Electrical and solar power supply
The booster sets are connected to a 3 × 380-415 V supply; the MGE motors with built-in frequency converter start smoothly and require no external motor protection. On a site without a reliable mains supply, a solar system with storage and three-phase inverters (Victron, Studer, SMA Sunny Island X) or a generator powers the booster set; we check the starting power and the power input at the duty point before finalising the sizing.


Frequently asked questions


How do you size a booster set?
Three figures are enough for a first selection: the peak flow rate of the network (in m³/h, from the number of users, rooms or draw-off points and the simultaneity factor), the pressure to be guaranteed at the most unfavourable point (generally 2 to 3 bar at the highest or most remote tap) and the static head between the water level in the tank and that point, plus the friction losses in the pipes. The sum gives the total head; the booster set is selected to deliver the peak flow rate at this total head, with a standby pump if the service must never be interrupted. Send us these figures and we will select the model with the Grundfos software.

Hydro Multi-E or Hydro MPC?
The Hydro Multi-E covers requirements up to 76 m³/h rated flow and 11 kW per pump, with the electronics built into the motors and no cabinet: it is the choice for villages, hotels, schools and residential buildings. The Hydro MPC adds the CU 352 control cabinet with touch screen, up to six pumps, standby pumps, supervision options and flow rates up to 725 m³/h: it is the booster set for towns, districts, hospitals and industrial sites, or for projects that require a complete control cabinet.

Can a booster set be powered by solar energy?
Yes, provided you have storage and three-phase inverters sized for the total power of the pumps and for their starting: the MGE motors with built-in frequency converter start smoothly and accept the 3 × 380-415 V supply of a Victron, Studer or SMA Sunny Island X system. In most projects, the SP + RSI solar borehole fills the tank during the day and the booster set distributes water at any hour, powered by the mains, a generator or the solar system with batteries. We size the whole system.

What is the difference between variable speed and fixed speed?
A variable-speed booster set (Hydro Multi-E, Hydro MPC-E and -F) keeps the pressure constant by adapting the pump speed to demand: less water hammer, less energy consumed at partial flow, fewer starts. A fixed-speed booster set (Hydro Multi-B, Multi-S, MPC-S) operates on/off on pressure switches with a larger diaphragm tank; it remains a sound choice for small budgets or for networks with very steady consumption. We offer it on request.

What about lead times and export?
Booster sets are assembled by Grundfos to order according to the chosen configuration (pumps, voltage, materials, options). We state the lead time when quoting and organise sea or air freight, customs clearance and commissioning support for projects worldwide.

Size your solar pumping system in two minutes

LE LAB, our free online tool, sizes it from your water need, the depth and your location: recommended pump, controller and PV power. No account required.

Launch LE LAB Or request a free study
Project support · Worldwide delivery

Get the support your project needs

From product selection to export logistics, our team helps installers, EPCs and distributors turn a requirement into a clear professional quotation.

B2B supply Sea or air freight Worldwide export
From requirement to delivery
  1. 01Share your products and quantities
  2. 02Receive a clear B2B quotation
  3. 03We coordinate worldwide delivery
Start your request