The variable-speed stepper motor of the DDE replaces the stroke-length or stroke-frequency adjustment of traditional pumps: the diaphragm always works over its full stroke, which ensures continuous, even dosing even at 0.1 % of the rated flow rate, with no tricky calibration and no valve that clogs up.
The dosing head is available in polypropylene, PVC, PVDF or stainless steel, with EPDM, FKM or PTFE gaskets and ceramic balls: sodium hypochlorite, dilute acids and bases, flocculants, liquid fertilisers, cleaning agents. The click-on mounting plate allows mounting on a tank, on a wall or on a bracket without any additional accessory.
Universal power supply 100-240 V, 50/60 Hz, power consumption below 20 W, enclosure class IP65. Variants P and PR have inputs for a pulse water meter, external stop and tank level signals.
Applications: chlorination of borehole and mains water, pH correction, fertigation and fertiliser injection on drip irrigation, water treatment for public swimming pools, flocculant dosing, light industrial processes.
Official Grundfos distributor, SINES Export supplies Grundfos dosing pumps to installers, operators, industrial users and engineering firms worldwide. We help you choose the dosing head and the control variant suited to your chemical and your installation, and we deliver the pump with its accessories (installation kit, injection valve, tank, water meter).
Solar or off-grid site: this dosing pump runs on 100-240 V AC; on a solar borehole it is connected to the output of an inverter (Victron, Studer) or to the station's mains supply. Its consumption of a few watts is negligible compared with that of the submersible pump. For chlorination proportional to the pumped flow, choose a variant with pulse input and a pulse water meter. See also the Grundfos system from A to Z and solar water supply.
B – manual control. Flow rate set from 0.1 to 100 % by a knob, LED display. The simplest variant, for constant dosing: chlorinating a tank, pH correction, fertiliser injection at a fixed rate.
P – manual + pulse. Adds pulse mode: the pump doses a set volume for each pulse from a water meter. This is the variant for flow-proportional dosing, for example chlorinating a borehole. External stop and tank level (low and empty) inputs.
PR – pulse + relays. Variant P plus two configurable output relays (alarm, warning, stroke signal, pump dosing) to report the pump status to a PLC or a remote monitoring system.
Reading a designation. Example: DDE 15-4 B-PP/E/C-X-31U2U2FG = DDE 15-4, variant B, PP head, EPDM gasket, Ceramic ball, control cube front-mounted (F) or absent (X), power supply 100-240 V (3), EU plug (1), 4/6 mm hose connections (U2U2) or installation kit (I001).