The DDA doses degassing liquids without losing its prime thanks to automatic deaeration, even in standby, and achieves a turndown ratio of 1:3000 on the 7.5-16 size. The FCM variant integrates measurement of the actual flow in the dosing head: the FlowControl function detects air bubbles, cavitation, overpressure and burst lines, and AutoFlowAdapt corrects the motor speed to hold the setpoint when the pressure at the injection point varies.
Connectivity is built in: configuration and monitoring from a smartphone with Grundfos GO, supervision via Modbus TCP or RTU, firmware updates on the fly. The electronics board and the power cable can be replaced on site. The dimensions, the mounting plate and the dosing head materials are identical to those of the previous generation, which makes it simple to replace an existing DDA.
Manual, pulse, analogue 0/4-20 mA, batch and timer modes; analogue output; two configurable relays; external stop and level inputs. PP, PVC, PVDF or stainless-steel head. Power supply 100-240 V, 24 W, IP65.
Applications: supervised drinking-water and industrial water treatment plants, precision dosing in process applications, reverse osmosis and ultrafiltration, coagulation and flocculation, cleaning in place, remotely managed installations.
Official Grundfos distributor, SINES Export supplies Grundfos dosing pumps to installers, operators, industrial users and engineering firms worldwide. We help you choose the dosing head and the control variant suited to your chemical and your installation, and we deliver the pump with its accessories (installation kit, injection valve, tank, water meter).
Solar or off-grid site: this dosing pump runs on 100-240 V AC; on a solar borehole it is connected to the output of an inverter (Victron, Studer) or to the station's mains supply. Its consumption of a few watts is negligible compared with that of the submersible pump. For chlorination proportional to the pumped flow, choose a variant with pulse input and a pulse water meter. See also the Grundfos system from A to Z and solar water supply.
AR – analogue + relays. Variant A plus an analogue control input 0/4-20 mA and alarm relays: the pump follows the setpoint from a chlorine or pH controller, or from a PLC.
FCM – integrated flow measurement. Variant AR with FlowControl: the pump measures the flow actually dosed in the dosing head, detects air bubbles, cavitation, overpressure or a burst line, and automatically compensates for pressure variations (AutoFlowAdapt). The benchmark for monitored processes.
Reading a designation. Example: DDA 30-4 AR-C-PP/E/C-F-31U2U2FG = DDA 30-4, variant AR, PP head, EPDM gasket, Ceramic ball, control cube front-mounted (F) or absent (X), power supply 100-240 V (3), EU plug (1), 4/6 mm hose connections (U2U2) or installation kit (I001).