SMART Digital XL pumps are an advantageous replacement for mechanical pumps of the same flow rate on installations that call for accuracy, automatic deaeration or remote control. The DDA XL retains the functions of the small DDA: AutoFlowAdapt and FlowControl on the FCM variant, manual, pulse, analogue, batch and timer modes, two relays, Grundfos GO. The DDE XL offers manual control (B) or analogue and relay control (AR) at a lower cost.
PVC, PVDF or stainless-steel dosing head, EPDM, FKM or PTFE gaskets, G 5/4 connections for 19/27 mm hose or Rp 3/4" internal thread on stainless-steel versions. SlowMode 25 and 50 % for liquids up to 3 000 mPa·s with spring-loaded valves.
Power supply 100-240 V, 50/60 Hz, enclosure class IP65. Turndown ratio 1:800, maximum pressure 10 bar at 60 l/h, 7 bar at 120 l/h, 4 bar at 200 l/h.
Applications: medium-capacity water treatment plants, coagulation and flocculation, chemical dosing in industry, cooling towers, wastewater treatment, industrial washing.
Official Grundfos distributor, SINES Export supplies Grundfos dosing pumps to installers, operators, industrial users and engineering firms worldwide. We help you choose the dosing head and the control variant suited to your chemical and your installation, and we deliver the pump with its accessories (installation kit, injection valve, tank, water meter).
Solar or off-grid site: this dosing pump runs on 100-240 V AC; on a solar borehole it is connected to the output of an inverter (Victron, Studer) or to the station's mains supply. Its consumption of a few watts is negligible compared with that of the submersible pump. For chlorination proportional to the pumped flow, choose a variant with pulse input and a pulse water meter. See also the Grundfos system from A to Z and solar water supply.
AR – analogue + relays. Variant A plus an analogue control input 0/4-20 mA and alarm relays: the pump follows the setpoint from a chlorine or pH controller, or from a PLC.
FCM – integrated flow measurement. Variant AR with FlowControl: the pump measures the flow actually dosed in the dosing head, detects air bubbles, cavitation, overpressure or a burst line, and automatically compensates for pressure variations (AutoFlowAdapt). The benchmark for monitored processes.
B – manual control. Flow rate set from 0.1 to 100 % by a knob, LED display. The simplest variant, for constant dosing: chlorinating a tank, pH correction, fertiliser injection at a fixed rate.