The backlit display shows the set flow rate in l/h or ml/h, the pump status and the alarms. The click wheel and the buttons allow direct setting, with no conversion table. SlowMode at 25 or 50 % slows down the suction stroke for viscous or degassing liquids, and the calibration mode adjusts the actual flow rate in a few minutes.
The AR variant adds the 0/4-20 mA analogue input and two relays: the DDC becomes the dosing element of a chlorine, pH or redox controller, or of a plant PLC. Both variants have the pulse input for proportional dosing from a water meter, external stop and two-sensor level monitoring.
PP, PVC, PVDF or stainless-steel dosing head, EPDM, FKM or PTFE gaskets, ceramic balls. Power supply 100-240 V, 22 W, IP65, control cube positionable at the front, on the left or on the right.
Applications: drinking-water and wastewater treatment plants, disinfection and pH adjustment, coagulant and flocculant dosing, cooling towers, food and beverage industry, public swimming pools.
Official Grundfos distributor, SINES Export supplies Grundfos dosing pumps to installers, operators, industrial users and engineering firms worldwide. We help you choose the dosing head and the control variant suited to your chemical and your installation, and we deliver the pump with its accessories (installation kit, injection valve, tank, water meter).
Solar or off-grid site: this dosing pump runs on 100-240 V AC; on a solar borehole it is connected to the output of an inverter (Victron, Studer) or to the station's mains supply. Its consumption of a few watts is negligible compared with that of the submersible pump. For chlorination proportional to the pumped flow, choose a variant with pulse input and a pulse water meter. See also the Grundfos system from A to Z and solar water supply.
A – standard. Manual and pulse modes, backlit graphic display, click wheel, SlowMode 25 and 50 % for viscous liquids, calibration mode, external stop and two-sensor level inputs, two output relays.
AR – analogue + relays. Variant A plus an analogue control input 0/4-20 mA and alarm relays: the pump follows the setpoint from a chlorine or pH controller, or from a PLC.
Reading a designation. Example: DDC 15-4 A-PP/E/C-F-31U2U2FG = DDC 15-4, variant A, PP head, EPDM gasket, Ceramic ball, control cube front-mounted (F) or absent (X), power supply 100-240 V (3), EU plug (1), 4/6 mm hose connections (U2U2) or installation kit (I001).