Grundfos CRFlex solar surface pumps
Official Grundfos distributor, SINES Export supplies the CRFlex range, the Grundfos solar surface pump: stainless-steel multistage CR hydraulics and the MGFlex motor with built-in frequency converter, powered with direct current by PV panels or with alternating current by a generator or the mains.
Nine models cover 4 to 32 m³/h and 2 to 150 m of head, in 304 (CRIF) or 316 (CRNF) stainless steel. Maximum power point tracking is built into the motor: no controller or inverter to add, the pump follows the sun and its protections are on board.
The CRFlex is the surface counterpart of the submersible SQFlex: intake from a river, lake, basin or tank, drip irrigation, livestock watering, tank filling, pressure boosting for an isolated site. Suction lift limited to 6 m. Supplied to order, with the IO 50 and IO 101 control boxes, the level and dry-running switches, and the PV array sized by our engineering team.
Up to 4 m³/h, 5 to 150 m head. Elevated tank, remote plot, small water supply scheme.
Up to 7 m³/h, 5 to 100 m. The size for drip irrigation and livestock watering.
Up to 20 m³/h, 4 to 25 m. Intake from a river or basin to a network.
The CRFlex range in one table
| Model | Max. flow rate | Useful head | Motor | CRIF code (304) | CRNF code (316) |
|---|---|---|---|---|---|
| CRFlex 1-9 | 4 m³/h | 5 to 80 m | MGFlex 80A, 880 W | 98414238 | 98415280 |
| CRFlex 1-17 | 4 m³/h | 20 to 150 m | MGFlex 90Sc, 1730 W | 98414701 | 98415305 |
| CRFlex 3-5 | 7 m³/h | 5 to 45 m | MGFlex 80A, 880 W | 98414264 | 98415292 |
| CRFlex 3-11 | 7 m³/h | 5 to 100 m | MGFlex 90Sc, 1730 W | 98414709 | 98415330 |
| CRFlex 5-2 | 12 m³/h | 2 to 18 m | MGFlex 80A, 650 W | 98414267 | 98415294 |
| CRFlex 5-6 | 13 m³/h | 5 to 55 m | MGFlex 90Sc, 1730 W | 98414724 | 98415331 |
| CRFlex 10-1 | 19 m³/h | 4 to 14 m | MGFlex 80A, 700 W | 98414699 | 98415326 |
| CRFlex 10-2 | 20 m³/h | 5 to 25 m | MGFlex 90Sc, 1400 W | 98414726 | 98415335 |
| CRFlex 15-1 | 32 m³/h | 6 to 18 m | MGFlex 90Sc, 1730 W | 98414771 | 98415336 |
Control boxes and accessories
| Accessory | Article code | Note |
|---|---|---|
| IO 50 V2 control box (manual on/off, cable connection) | 93095688 | Basic control box of the solar system, stocked by Grundfos |
| IO 101 230 V control box (solar / generator changeover) | 96475074 | Automatic return to solar when the generator stops, stocked by Grundfos |
| Dry-running switch | 97911215 | Stops the pump if there is no water at the inlet |
| Level switch, normally closed contact | 97911220 | Stops the pump when the tank is full |
How to choose
Three figures are enough: the volume of water per day, the total head between the water surface and the highest point (plus the friction losses in the pipe and the filter), and the solar irradiation at the site. The hydraulic size (1, 3, 5, 10, 15) is chosen on the flow rate, the number of stages (the second figure) on the head, and the solar array is read from the pump curve. Beyond 6 m of suction lift or for a borehole, the submersible SQFlex is the right choice; for a high flow rate, the three-phase SP with RSI inverter.
Solar, generator or mains
The MGFlex motor accepts 30 to 300 V DC and 90 to 240 V AC. With the IO 101 control box, the generator is connected as a backup; the pump returns to solar by itself when the generator stops. The same equipment therefore serves for solar-direct operation, on generator backup, or on an unstable grid.
Choosing the right CRFlex
Size according to flow rate (CRFlex 1, 3, 5, 10, 15), stages according to head, material CRIF (304 stainless steel) or CRNF (316 stainless steel) according to the liquid; the recommended PV power is given on each product page.
The MGFlex motor
Built-in frequency converter and MPPT, direct current supply from the panels or alternating current from a generator or the mains, on-board dry-running and overload protection: no external controller.
Applications
Intake from a river, lake or tank, drip and sprinkler irrigation, tank filling, pressure boosting for an isolated site; suction lift limited to 6 m.
Accessories
IO 50 and IO 101 control boxes, level and dry-running switches, float switches, and the PV array sized by our engineering team.
Frequently asked questions
CRFlex or Lorentz PS2 CS-F?
CRFlex for all-in-one integration and CR stainless steel, Lorentz for the range of accessories and monitoring; both pump directly from the sun, without batteries.