Solar · Storage · Off-grid B2B worldwide export wholesaler

Professional equipment supply for installers, EPC contractors and distributors.

Grundfos CRFlex 5 solar surface pump


GRUNDFOS CRFlex 5



Stainless-steel solar surface pump, flow rate up to 13 m³/h, head up to 55 m, MGFlex DC or AC motor with built-in MPPT

The CRFlex 5 is the Grundfos solar surface pump in size 5: stainless-steel CR 5 hydraulics and an MGFlex motor that runs equally well on PV panels, a generator or the mains. It is the size for transfer and medium-area irrigation, with a very economical 5-2 version for low heads.


CRFlex 5-2

Max. flow rate: 12 m³/h
Head: 2 to 18 m

CRFlex 5-6

Max. flow rate: 13 m³/h
Head: 5 to 55 m

Worldwide B2B pump supply and export

The CRFlex combines a CR vertical multistage centrifugal pump, the Grundfos benchmark in stainless steel, with the MGFlex permanent-magnet motor designed for solar power. The frequency converter is built into the motor: the pump directly accepts direct current from a PV array, from 30 to 300 V, or 90 to 240 V alternating current from a generator or the mains. On solar power, maximum power point tracking (MPPT) continuously adapts the speed to the sunlight, with no external controller or inverter.

The motor has its protections built in: overvoltage and undervoltage, overload, overtemperature, and the input for a dry-running switch or a tank float switch. The IO 50 control box serves as a junction box and switch; the IO 101 control box allows a backup generator to be connected and switches back to solar by itself when the generator stops.

Two versions: CRIF in 304 stainless steel for ordinary clean water, CRNF in 316 stainless steel for chloride-laden water, up to 500 ppm. Clean, non-aggressive liquids, pH 5 to 9, sand 20 ppm maximum, suction lift limited to 6 m between the dynamic water level and the pump inlet. The pump is installed sheltered from rain and direct sunlight.

Applications: water intake from a river, lake, basin or tank; drip irrigation and low-pressure sprinkling; livestock watering; supplying a village reservoir; pressure boosting for an isolated building; swimming-pool filtration without outdoor electrical wiring.

Sizing the solar array: the peak power is read from the pump curve, flow rate versus power input P1 for each head. Allow for a PV array of 1.2 to 1.5 times the power P1 at the duty point, with panels wired in series to stay between 30 and 300 V DC. Our engineering team sizes the array, the cabling and the protection devices, and can add a backup generator via the IO 101 control box. For a borehole, see the submersible SQFlex; for a high flow rate in three-phase, the SP with RSI inverter.

Official Grundfos distributor, SINES Export supplies CRFlex solar surface pumps to installers, farmers, NGOs and engineering firms worldwide. Supplied to order, with control boxes, level and dry-running switches, and a matching PV array.

Specification CRFlex 5-2 CRFlex 5-6
Max. flow rate12 m³/h13 m³/h
Useful head range2 to 18 m5 to 55 m
MotorMGFlex 80A, 650 WMGFlex 90Sc, 1730 W
Power supply30-300 V DC (MPPT) or 1 × 90-240 V AC, 50/60 Hz30-300 V DC (MPPT) or 1 × 90-240 V AC, 50/60 Hz
Built-in protectionovervoltage/undervoltage, overload, overtemperature, dry running (optional)overvoltage/undervoltage, overload, overtemperature, dry running (optional)
ConnectionPJE DN 25/32, PN 25PJE DN 25/32, PN 25
Height B1 / B1+B2257 / 471 mm387 / 621 mm
Overall dimensions D1 / D2122 / 158 mm122 / 158 mm
Net weight21.6 kg30.2 kg
Max. suction lift6 m6 m
Liquidclean water, pH 5-9, 0 to 120 °C, sand 20 ppm max.clean water, pH 5-9, 0 to 120 °C, sand 20 ppm max.
Motor protectionIP55, class FIP55, class F
Cable2 m supplied2 m supplied

CRFlex 5-2

Grundfos CRFlex 5-2 performance curve, flow rate versus solar power

CRFlex 5-6

Grundfos CRFlex 5-6 performance curve, flow rate versus solar power

Flow rate in m³/h as a function of power input P1 in watts, for each head. Average curves, tolerance ± 15 %, water at 20 °C. Source: Grundfos data booklet.

Installation diagram of a CRFlex pump on solar panels with IO 50 control box

CRFlex pump, PV array, IO 50 control box, non-return valve and, as options, dry-running switch and tank float switch. With the IO 101 control box, a generator takes over at night or in overcast weather.

References & article codes


Complete pump, MGFlex motor factory-fitted, 2 m cable. CRIF: CRI hydraulics in 304 stainless steel. CRNF: CRN hydraulics in 316 stainless steel for chloride-laden water. Price and lead time on request.

Model CRIF code (304 stainless steel) CRNF code (316 stainless steel) Motor Max. flow rate Head
CRFlex 5-29841426798415294MGFlex 80A12 m³/h2 to 18 m
CRFlex 5-69841472498415331MGFlex 90Sc13 m³/h5 to 55 m

Control boxes and accessories


Accessory Article code Note
IO 50 V2 control box (manual on/off, cable connection)93095688Basic control box of the solar system, stocked by Grundfos
IO 101 230 V control box (solar / generator changeover)96475074Automatic return to solar when the generator stops, stocked by Grundfos
Dry-running switch97911215Stops the pump if there is no water at the inlet
Level switch, normally closed contact97911220Stops the pump when the tank is full

Documentation


See also: all CRFlex pumps · solar surface pumps · the Grundfos system from A to Z · solar drip irrigation guide.

Go further

Size your solar pumping system in two minutes

LE LAB, our free online tool, sizes it from your water need, the depth and your location: recommended pump, controller and PV power. No account required.

Launch LE LAB Or request a free study
Project support · Worldwide delivery

Get the support your project needs

From product selection to export logistics, our team helps installers, EPCs and distributors turn a requirement into a clear professional quotation.

B2B supply Sea or air freight Worldwide export
From requirement to delivery
  1. 01Share your products and quantities
  2. 02Receive a clear B2B quotation
  3. 03We coordinate worldwide delivery
Start your request