The CRFlex combines a CR vertical multistage centrifugal pump, the Grundfos benchmark in stainless steel, with the MGFlex permanent-magnet motor designed for solar power. The frequency converter is built into the motor: the pump directly accepts direct current from a PV array, from 30 to 300 V, or 90 to 240 V alternating current from a generator or the mains. On solar power, maximum power point tracking (MPPT) continuously adapts the speed to the sunlight, with no external controller or inverter.
The motor has its protections built in: overvoltage and undervoltage, overload, overtemperature, and the input for a dry-running switch or a tank float switch. The IO 50 control box serves as a junction box and switch; the IO 101 control box allows a backup generator to be connected and switches back to solar by itself when the generator stops.
Two versions: CRIF in 304 stainless steel for ordinary clean water, CRNF in 316 stainless steel for chloride-laden water, up to 500 ppm. Clean, non-aggressive liquids, pH 5 to 9, sand 20 ppm maximum, suction lift limited to 6 m between the dynamic water level and the pump inlet. The pump is installed sheltered from rain and direct sunlight.
Applications: water intake from a river, lake, basin or tank; drip irrigation and low-pressure sprinkling; livestock watering; supplying a village reservoir; pressure boosting for an isolated building; swimming-pool filtration without outdoor electrical wiring.
Sizing the solar array: the peak power is read from the pump curve, flow rate versus power input P1 for each head. Allow for a PV array of 1.2 to 1.5 times the power P1 at the duty point, with panels wired in series to stay between 30 and 300 V DC. Our engineering team sizes the array, the cabling and the protection devices, and can add a backup generator via the IO 101 control box. For a borehole, see the submersible SQFlex; for a high flow rate in three-phase, the SP with RSI inverter.
Official Grundfos distributor, SINES Export supplies CRFlex solar surface pumps to installers, farmers, NGOs and engineering firms worldwide. Supplied to order, with control boxes, level and dry-running switches, and a matching PV array.
CRFlex 3-5
CRFlex 3-11
Flow rate in m³/h as a function of power input P1 in watts, for each head. Average curves, tolerance ± 15 %, water at 20 °C. Source: Grundfos data booklet.
CRFlex pump, PV array, IO 50 control box, non-return valve and, as options, dry-running switch and tank float switch. With the IO 101 control box, a generator takes over at night or in overcast weather.