Solar · Storage · Off-grid B2B worldwide export wholesaler

Professional equipment supply for installers, EPC contractors and distributors.

SINES - Grundfos MMS rewindable motors


GRUNDFOS MMS REWINDABLE MOTORS



Rewindable submersible motors from 22 to 147 kW: stator repairable locally, for high-power water supply and irrigation boreholes

MMS motors are the Grundfos rewindable submersible motors: MMS 6 from 22 to 37 kW, MMS 8000 from 37 to 92 kW and MMS 10000 at 132 and 147 kW in the Grundfos catalogue, in three-phase 3 × 400 V. Their stator is wound with electrolytic copper wire sheathed in thermoplastic, in direct contact with the motor liquid: in the event of burnout, a rewinding workshop puts the motor back into service without replacing it. It is the choice for water supply boreholes, pumping stations and remote sites where local repair matters as much as the purchase price.


MMS 6

6", 22 to 37 kW
Ø 144 mm

MMS 8000

8", 37 to 92 kW
Ø 192 mm

MMS 10000

10", 132 and 147 kW
Ø 237 mm

Worldwide B2B pump supply and export

MMS motors are available in N (stainless steel EN 1.4401) and R (EN 1.4539) versions for aggressive water, with PE2 or PE2/PA winding and replaceable ceramic-carbon or SiC/SiC shaft seal (“SIC” codes). Models marked SD are started in star-delta; above 75 kW, Grundfos recommends a soft starter or an autotransformer. MMS 6 to MMS 10000 motors can be installed horizontally within the power limits given in the manual, always with a cooling sleeve and a suitable support.

MMS motors have no Tempcon sensor: the temperature is monitored with a Pt100 or Pt1000 sensor connected to a PR 5714 relay or to the control box, with a fixing kit suited to the diameter (insertion probe for MMS 10000 and 12000). Cooling requires at least 0.15 m/s along the motor; depending on the winding, the maximum liquid temperature is 25 to 50 °C (see the table in the data booklet). The number of starts is limited: 3 per hour and 40 per day for a PVC winding, 10 per hour and 70 per day for a PE/PA winding on MMS 6.

Before installation, the motor is positioned at 45°, top end up, and filled through the bleed valve until it overflows. The insulation resistance is measured with the motor out of the well, after the joint is made and in the borehole. We help you choose between MS 6000 and MMS 6 in the shared range from 22 to 30 kW: the MS 6000 is more compact and economical, the MMS can be repaired.

Applications: drinking-water supply boreholes for towns and villages, pumping stations, large-area irrigation, mine dewatering, replacement of burnt-out motors on high-power 6", 8" and 10" SP pumps.

Official Grundfos distributor, SINES Export supplies Grundfos motors, protection units, cables and borehole accessories to installers, drillers, operators and NGOs, for worldwide export. For a replacement, send us the pump and motor nameplates: we check compatibility and prepare the complete motor, cable, joint and protection set. See also the SP submersible pumps, the RSI solar inverter and the “equipping an SP borehole” guide.

MMS three-phase 3 × 400 V, 50 Hz

Motor Size Power P2 Current In Efficiency at 100 % Cos φ at 100 % Ist / In Length Weight
MMS 66"22 kW51.5 A83 %0.795.51087 mm95 kg
MMS 66"26 kW61 A83 %0.785.71157 mm105 kg
MMS 66"30 kW68.2 A84 %0.815.01212 mm110 kg
MMS 66"37 kW84.5 A83 %0.815.11312 mm120 kg
MMS 80008"37 kW78.5 A84 %0.855.71160 mm156 kg
MMS 80008"45 kW96.5 A86 %0.826.01270 mm177 kg
MMS 80008"55 kW114 A86 %0.855.91350 mm192 kg
MMS 80008"63 kW132 A87 %0.835.71490 mm218 kg
MMS 80008"75 kW152 A87 %0.865.81590 mm237 kg
MMS 80008"92 kW186 A87 %0.865.91830 mm283 kg
MMS 1000010"132 kW270 A88 %0.845.71870 mm435 kg
MMS 1000010"147 kW315 A87 %0.816.22070 mm500 kg

Common specifications

Specification Value
DiameterMMS 6: 144 mm ; MMS 8000: 192 mm ; MMS 10000: 237 mm
Windingcopper wire sheathed in PVC, PE2 or PE2/PA, rewindable
VersionsN (EN 1.4401) and R (EN 1.4539); ceramic-carbon or SiC/SiC shaft seal
Startingdirect-on-line (DOL) or star-delta (SD); starter recommended above 75 kW
Max. operating pressure60 bar
MonitoringPt100 / Pt1000 sensor and PR 5714 relay (no Tempcon)
Horizontal installationMMS 6 5.5-37 kW, MMS 8000 22-92 kW, MMS 10000 75-170 kW, with sleeve and support

Data from the Grundfos SP A, SP data booklet (50 Hz). Full data, versions and other voltages on the Grundfos Product Center or on request.

Official Grundfos documents.

Need sizing or a replacement? Contact us with the nameplate: we prepare the complete set.

References & article codes


Grundfos catalogue codes. PE2 / PE2+PA: winding material; SIC: SiC/SiC shaft seal; DOL: direct-on-line start; SD: star-delta. MMS 12000 and other power ratings on request.

MMS 6 (6")

Article code Grundfos designation Power Options
96879425MMS6ST50 3x380-415/50 460/60 22kW22 kWdirect-on-line
96879426MMS6ST50 3x380-415/50 460/60 26kW26 kWdirect-on-line
96879427MMS6ST50 3x380-415/50 460/60 30kW30 kWdirect-on-line
96879428MMS6ST50 3x380-415/50 460/60 37kW37 kWdirect-on-line
96879432MMS6ST50 3x380-415/50 460/60 SD 37kW37 kWstar-delta

MMS 8000 (8")

Article code Grundfos designation Power Options
96530182MMS8000 400/50 460/60 37kW DOL PE2 SIC37 kWdirect-on-line, SiC/SiC shaft seal, PE2 winding
96470739MMS8000 400/50 460/60 45kW DOL PE245 kWdirect-on-line, PE2 winding
96476891MMS8000 400/50 460/60 45kW DOL PE2 SIC45 kWdirect-on-line, SiC/SiC shaft seal, PE2 winding
96470780MMS8000 400/50 460/60 55kW DOL PE255 kWdirect-on-line, PE2 winding
96476892MMS8000 400/50 460/60 55kW DOL PE2 SIC55 kWdirect-on-line, SiC/SiC shaft seal, PE2 winding
96530193MMS8000 400/50 460/60 55kW SD PE2 SIC55 kWstar-delta, SiC/SiC shaft seal, PE2 winding
96473399MMS8000 3x400/50 460/60 63kW PE2+PA63 kWdirect-on-line, PE2/PA winding
96530195MMS8000 400/50 460/60 63kW SD PE2 SIC63 kWstar-delta, SiC/SiC shaft seal, PE2 winding
96476893MMS8000 400/50 460/60 75kW DOL PE2 SIC75 kWdirect-on-line, SiC/SiC shaft seal, PE2 winding
96473490MMS8000 400/50 460/60 92kW DOL PE292 kWdirect-on-line, PE2 winding
96476894MMS8000 400/50 460/60 92kW DOL PE2 SIC92 kWdirect-on-line, SiC/SiC shaft seal, PE2 winding

MMS 10000 (10")

Article code Grundfos designation Power Options
96521619MMS10000 400/50 460/60 132kW DOL PE2 SIC132 kWdirect-on-line, SiC/SiC shaft seal, PE2 winding
96540302MMS10000 400/50 460/60 147kW DOL PE2 SIC147 kWdirect-on-line, SiC/SiC shaft seal, PE2 winding

Size your solar pumping system in two minutes

LE LAB, our free online tool, sizes it from your water need, the depth and your location: recommended pump, controller and PV power. No account required.

Launch LE LAB Or request a free study
Project support · Worldwide delivery

Get the support your project needs

From product selection to export logistics, our team helps installers, EPCs and distributors turn a requirement into a clear professional quotation.

B2B supply Sea or air freight Worldwide export
From requirement to delivery
  1. 01Share your products and quantities
  2. 02Receive a clear B2B quotation
  3. 03We coordinate worldwide delivery
Start your request