The CUE 1 × 200-240 V takes a single-phase supply and delivers a three-phase voltage to the motor (Grundfos manual). It therefore makes it possible to run a pump with a 3 × 200-240 V three-phase motor where only single-phase power is available.
Like all CUE units, it is set up through a start-up guide that asks for the pump family and the motor nameplate data, then the control mode: constant curve, constant pressure, constant flow rate or constant level with a 4-20 mA sensor.
The Grundfos 2026 catalogue offers seven power ratings from 1.1 to 7.5 kW: in IP20 for 1.1 kW, in IP21 from 1.5 to 7.5 kW for cabinet mounting, and in IP55 from 1.1 to 7.5 kW for wall mounting. Each size has its matching sine-wave filter, to be provided in particular with submersible pumps.
Applications: CR, CRN and submersible pumps with a 3 × 200-240 V three-phase motor on a single-phase mains supply, constant-pressure boosting, irrigation, water transfer.
Official Grundfos distributor, SINES Export supplies CUE frequency converters, their filters and their accessories to installers, integrators, engineering firms and operators, for worldwide export. Send us the motor nameplate and the cable length: we select the right CUE size and filter. See also the SP submersible pumps, the variable-speed SPE pumps and the CR and CRN pumps.
Sizes in the Grundfos 2026 catalogue
| Motor power P2 |
Rated current In (A) |
Enclosures |
Matching sine-wave filter |
| 1.1 kW | 6.6 | IP20 · IP55 | 96754973 |
| 1.5 kW | 7.5 | IP21 · IP55 | 96754973 |
| 2.2 kW | 10.6 | IP21 · IP55 | 96754976 |
| 3 kW | 12.5 | IP21 · IP55 | 96754976 |
| 3.7 kW | 16.7 | IP21 · IP55 | 96754976 |
| 5.5 kW | 24.2 | IP21 · IP55 | 96754977 |
| 7.5 kW | 30.8 | IP21 · IP55 | 96754978 |
Common specifications
| Specification |
Value |
| Function | external frequency converter designed for Grundfos pumps, with a start-up guide for each pump family (CR, CRI, CRN, CRT, SP, SP-G, SP-NE…) |
| Control modes | open loop, constant pressure, constant or proportional differential pressure, constant flow rate, constant temperature, constant level, other constant value |
| Inputs and outputs | 1 RS-485 GENIbus port, 1 analogue input 0-10 V / 0-4-20 mA for the external setpoint, 1 analogue input 0-4-20 mA for the sensor, 1 analogue output 0-20 mA, 4 digital inputs (start / stop and 3 programmable), 2 programmable relays |
| Communication | GENIbus as standard; other protocols via a CIU communication unit |
| Motor cable | screened to comply with EN 61800-3; 150 m maximum screened, 300 m unscreened; beyond that, please consult us |
| Installation | IP20 / IP21 in a cabinet only; IP54 / IP55 never outdoors without protection against water and sun |
| Altitude | above 2 000 m, the CUE derates its output: a larger size may be required |
Sources: Grundfos CUE manual, Grundfos SPE data booklet and Grundfos 2026 catalogue.
Official Grundfos documents.
The online manual covers CUE units from 0.55 to 90 kW; for sizes of 110 kW and above, we supply the corresponding Grundfos manual with the quotation.
To select the size and the filter, contact us with the motor nameplate, the site voltage and the motor cable length.