GRUNDFOS CRE 95

Surface pumps: Grundfos CRE

Head at Q=0 up to: 91 m · Official curve up to: 140 m³/h · Three-phase · 50 Hz selection

The Grundfos CRE 95 is an electronic variable-speed vertical multistage centrifugal pump with an integrated IE5 motor drive. Pump head and base are cast iron; the other wetted hydraulic components are AISI 304 stainless steel. Standard HQQE mechanical seal.

CRE 95-1-1 Head at Q=0: 37 m P2: 11 kW	CRE 95-1 Head at Q=0: 46 m P2: 15 kW	CRE 95-2-2 Head at Q=0: 72 m P2: 18.5 kW
CRE 95-2-1 Head at Q=0: 81 m P2: 22 kW	CRE 95-2 Head at Q=0: 91 m P2: 26 kW
Worldwide B2B pump supply and export

This selection covers CRE only: standard AISI 304 hydraulics, HQQE seal and three-phase supply for 50 Hz systems. CRIE, CRNE, single-phase, HQQV and prices are excluded.

The official catalogue supply is 3 × 380–500 V, 3 × 380–480 V or 3 × 400–480 V depending on motor power. The exact range is shown for every article code and covers the applicable part of European 380–415 V networks.

Numeric head values are read at Q=0 from the official 2026 Grundfos vector curves at maximum curve speed and rounded to the nearest metre. They support comparison and preselection.

Use Grundfos Product Center or the product datasheet for contractual duty-point sizing. No prices are published on this page.

Grundfos CRE 95 official 2026 hydraulic curves

Official Grundfos CRE 95 hydraulic curves from the 2026 catalogue, ISO 9906:2012 Grade 3B. Numeric table values correspond to the Q=0 curve intercept, rounded to the nearest metre.

Open Grundfos Product Center →

References & article codes

Standard Grundfos CRE 95 catalogue references: AISI 304 hydraulics, HQQE seal, three-phase 50 Hz. Versions with and without the official pressure sensor are distinguished. No prices are published.

Article code	Designation	Head at Q=0 [m]	P2 [kW]	Supply	Pressure sensor	Connection
99264346	CRE 95-1-1	37	11	3 × 380–500 V · 50 Hz	Without sensor	DIN flanges DN100 (F)
99264415	CRE 95-1-1	37	11	3 × 380–500 V · 50 Hz	With sensor	DIN flanges DN100 (F)
92958488	CRE 95-1	46	15	3 × 380–480 V · 50 Hz	Without sensor	DIN flanges DN100 (F)
92958976	CRE 95-1	46	15	3 × 380–480 V · 50 Hz	With sensor	DIN flanges DN100 (F)
92958984	CRE 95-2-2	72	18.5	3 × 380–480 V · 50 Hz	Without sensor	DIN flanges DN100 (F)
92958987	CRE 95-2-2	72	18.5	3 × 380–480 V · 50 Hz	With sensor	DIN flanges DN100 (F)
92958990	CRE 95-2-1	81	22	3 × 380–480 V · 50 Hz	Without sensor	DIN flanges DN100 (F)
92958995	CRE 95-2-1	81	22	3 × 380–480 V · 50 Hz	With sensor	DIN flanges DN100 (F)
93192255	CRE 95-2	91	26	3 × 400–480 V · 50 Hz	Without sensor	DIN flanges DN100 (F)

Grundfos CRE · Variable speed · 50 Hz

Scope: CRE only, standard AISI 304 hydraulics, HQQE seal and three-phase 50 Hz supply. Each page states the exact catalogue voltage, official 2026 curves, numeric head at Q=0, pressure-sensor variants and article codes. No prices are shown.

Request technical selection Grundfos CRE variable-speed vertical multistage pumps

Project support · Worldwide delivery

Get the support your project needs

From product selection to export logistics, our team helps installers, EPCs and distributors turn a requirement into a clear professional quotation.

B2B supply Sea or air freight Worldwide export

From requirement to delivery

01Share your products and quantities
02Receive a clear B2B quotation
03We coordinate worldwide delivery

Start your request