PS2-100 is a complete system in a box, ready to take away and carry under your arm. Installation is very easy, just connect the plugs and start pumping water. Even the pipe connection fits standard 1“ hoses, so no special connections to contend with.
The helical rotor submersible pump
can be used in a 4” well, can pump
water from a tank, pond or stream.
The mini pump controller has all of
the inputs you need to meet any
application
You can pump more than 7,000
gallons per day with one 200 Wp
PV module, or pump up to 130 feet
vertically. There is a handy chart on
the back page where you can see
the amazing performance.
PS2-100 systems are powered directly by the sun, no batteries, no fuel, no power supply to worry about. It’s free to use, quiet, clean and good for the environment.
PPS2-100 would typically be powered by a single 60 or 72 cell module in the power
range of 180 Wp to 260 Wp (larger is also ok). The maximum input voltage Voc is 50 VDC.
Where systems need to be mobile, folding module sets are a good solution. LORENTZ have
an LC-200 portable module kit available.
The PS2-100system includes
• high efficiency DC
brushless motor
• helical rotor pump
• 15 m cable attached to the
motor with a plug for the controller
• PS2-100 mini controller with accessory inputs for float switch
and low water sensor
• PV module adapter to use
with any standard PV module
(max. 50V Voc)
Optional
• PV modules
• well probe for dry run protection with cable
• float switch for tanks with cable
• 15 m motor extension cable with plug
• 15 m well probe / float switch extension cable with
plug
There are three different pumps
to choose from in the PS2-100 range: HR23, HR14 and HR07.
The chart below shows the daily water that will be pumped at different vertical heads.
Measure the vertical distance that you need to pump water and look on the bottom axis, read across to the left to see how much water to expect per day.
Data provided is the annual daily average based on using a single 205 Wp PV module at location 15N 0E. There are three pump end variants that cover the range
of head and flows, please contact us for advice on choosing the one to meet your needs.
