Quick sizing

LeLab is an online free application for the simulation and sizing of solar pumping systems. Launch !

Export

SINES ships products internationally. Shipping cost vary depending on the weight/volume. Read more !

Become a Partner

Partner with a global leader in the distribution of       solar powered pumps. Read more !

SINES - Lorentz - submersible solar pump


LORENTZ PS2-100 HR


  • Categorie : Submersible Solar Pumps

A small system with big performances


PS2-100
HR-07

Hmt max: 40m
Max: 1m³/h

PS2-100
HR-14

Hmt max: 27m
Max: 1,9m³/h

PS2-100
HR-23

Hmt max: 18m
Max: 2,7m³/h

Solar pumping systems for reliable Water Supply in Africa

PS2-100 is a complete system in a box, ready to take away and carry under your arm. Installation is very easy, just connect the plugs and start pumping water. Even the pipe connection fits standard 1“ hoses, so no special connections to contend with.

SINES - Lorentz - solar pump PS2-100

The helical rotor submersible pump can be used in a 4” well, can pump water from a tank, pond or stream. The mini pump controller has all of the inputs you need to meet any application

You can pump more than 7,000 gallons per day with one 200 Wp PV module, or pump up to 130 feet vertically. There is a handy chart on the back page where you can see the amazing performance.

PS2-100 systems are powered directly by the sun, no batteries, no fuel, no power supply to worry about. It’s free to use, quiet, clean and good for the environment.

PPS2-100 would typically be powered by a single 60 or 72 cell module in the power range of 180 Wp to 260 Wp (larger is also ok). The maximum input voltage Voc is 50 VDC. Where systems need to be mobile, folding module sets are a good solution. LORENTZ have an LC-200 portable module kit available.

The PS2-100system includes
• high efficiency DC brushless motor
• helical rotor pump
• 15 m cable attached to the motor with a plug for the controller
• PS2-100 mini controller with accessory inputs for float switch and low water sensor
• PV module adapter to use with any standard PV module (max. 50V Voc)

Optional
• PV modules
• well probe for dry run protection with cable
• float switch for tanks with cable
• 15 m motor extension cable with plug
• 15 m well probe / float switch extension cable with plug


SINES - Lorentz - accessoires pour pompe PS2-100

There are three different pumps to choose from in the PS2-100 range: HR23, HR14 and HR07.
The chart below shows the daily water that will be pumped at different vertical heads.
Measure the vertical distance that you need to pump water and look on the bottom axis, read across to the left to see how much water to expect per day.

SINES - Lorentz - pompe solaire immergée PS 100

Data provided is the annual daily average based on using a single 205 Wp PV module at location 15N 0E. There are three pump end variants that cover the range of head and flows, please contact us for advice on choosing the one to meet your needs.



SINES - controller PS2-100

Connection diagram - Lorentz PS2-100 HR   source: https://www.lorentz.de/

Get the support you need

You can contact our team through the button shown opposite. For a complete response, please indicate precisely your requirements. Our team will give you an answer as soon as possible.


Whether for 1, 10 or 100 pieces, if you are interested in our products we offer you the opportunity to pass an order and we deliver according to your requirements We only work with reliable logistics partners capable of providing export worldwide, as fast as possible