GRUNDFOS CR 95

Surface pumps: Grundfos CR

Head at Q=0 up to: 235 m · Official curve up to: 120 m³/h · 3 x 380-415 V · 50 Hz

The Grundfos CR 95 is a vertical multistage centrifugal pump with in-line suction and discharge ports. The pump head and base are cast iron; the other wetted hydraulic components are AISI 304 stainless steel. Standard HQQE mechanical seal.

CR 95-1-1 Head at Q=0: 25 m P2: 5.5 kW	CR 95-1 Head at Q=0: 32 m P2: 7.5 kW	CR 95-2-2 Head at Q=0: 49 m P2: 11 kW
CR 95-2 Head at Q=0: 62 m P2: 15 kW	CR 95-3-2 Head at Q=0: 80 m P2: 18.5 kW	CR 95-3 Head at Q=0: 93 m P2: 22 kW
CR 95-4 Head at Q=0: 125 m P2: 30 kW	CR 95-5 Head at Q=0: 155 m P2: 37 kW	CR 95-6 Head at Q=0: 186 m P2: 45 kW
CR 95-7 Head at Q=0: 218 m P2: 55 kW	CR 95-8-2 Head at Q=0: 235 m P2: 55 kW
Worldwide B2B pump supply and export

This selection covers only standard Grundfos CR pumps in three-phase 380-415 V, 50 Hz. CRI, CRN, single-phase, HQQV and other variants are excluded.

The numeric head values are read at Q=0 from the official 2026 Grundfos vector curves and rounded to the nearest metre. They support comparison and preselection.

Use Grundfos Product Center or the product datasheet for contractual duty-point sizing. No prices are published on this page.

Grundfos CR 95 official 2026 hydraulic curves

Official Grundfos CR 95 hydraulic curves from the 2026 catalogue, ISO 9906:2012 Grade 3B. Numeric table values correspond to the Q=0 curve intercept, rounded to the nearest metre.

Open Grundfos Product Center →

References & article codes

Standard Grundfos CR 95 references: AISI 304 hydraulics, HQQE seal, three-phase 380-415 V, 50 Hz. Both official connection variants are retained when listed. No prices are published.

Article code	Designation	Head at Q=0 [m]	P2 [kW]	In [A]	Connection
93388615	CR 95-1-1	25	5.5	12.2	DN100 flanges
93388616	CR 95-1	32	7.5	16	DN100 flanges
93390522	CR 95-2-2	49	11	22.2	DN100 flanges
93390542	CR 95-2	62	15	30.5	DN100 flanges
93390548	CR 95-3-2	80	18.5	39.5	DN100 flanges
93436060	CR 95-3	93	22	41.8	DN100 flanges
93435277	CR 95-4	125	30	56.1	DN100 flanges
93435280	CR 95-5	155	37	69.3	DN100 flanges
93435282	CR 95-6	186	45	84.7	DN100 flanges
93435285	CR 95-7	218	55	103.4	DN100 flanges
93435287	CR 95-8-2	235	55	103.4	DN100 flanges

Grundfos CR · 380-415 V · 50 Hz

Scope: CR only, standard AISI 304 hydraulics, HQQE seal, three-phase 380-415 V, 50 Hz. Every family page includes official 2026 curves, numeric Q=0 head values and catalogue article codes. No prices are shown.

Request technical selection Grundfos CR vertical multistage pumps

Project support · Worldwide delivery

Get the support your project needs

From product selection to export logistics, our team helps installers, EPCs and distributors turn a requirement into a clear professional quotation.

B2B supply Sea or air freight Worldwide export

From requirement to delivery

01Share your products and quantities
02Receive a clear B2B quotation
03We coordinate worldwide delivery

Start your request